Visit patproducts.com
All Categories
All Categories
Products
974
Brands
62
Documents
369
Technologies
Markets
Products
P.A.T. Products
All P.A.T. Products
Search products
Matching Product Categories
Industrial Additives & Materials
CASE Ingredients
Composite Materials
Cleaning Ingredients
Agrochemicals
Cosmetic Ingredients
Plastics
Fluids & Lubricants
Ready-to-Use Products
Elastomers
Base Chemicals & Intermediates
Pharmaceuticals & Nutraceuticals
Food Ingredients
Markets
Labeling Claims
Certifications & Compliance
Physical Form
Regional Availability
All Filters
298 Products
found on P.A.T. Products
Most Viewed
TDS
With TDS
P.A.T. Products
FILCO® 658
Polymer Name:
Thermoset Polyester
Chemical Family:
Polyesters
Processing Methods:
Pultrusion
FILCO® 658 is an unsaturated polyester resin presented in powder form, enriched with a catalyst and an antiblocking agent. Available in diverse variants like FILCO® 658 (around 1% catalyst) and FILCO® 658 (approximately 2% catalyst), it is recommended as an insoluble binder specifically designed for producing Continuous Filament Mat (CFM). Primarily utilized in pultrusion processes, this product appears as an off-white powder.
P.A.T. Products
Trapylen® 187 EAC
Functions:
Binder & Resin, Adhesion Promoter, Coupling Agent
Compatible Substrates & Surfaces:
Polyethylene (PE), Polypropylene (PP)
Compatible Polymers & Resins:
Natural Rubbers (NR), Styrene Butadiene Rubber (SBR)
Trapylen® 187 EAC is a chlorinated polypropylene dissolved in ethyl acetate. It possesses a slightly lower chlorine content compared to the similar Trapylen® 186 EAC but maintains good compatibility with other resins and polymers, along with excellent pigment wetting. The cured film exhibits high gloss and very good chemical and aging resistance. The primary advantage of Trapylen® 187 EAC lies in its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited and may be compensated for by using it with low-chlorinated Trapylen® grades.
P.A.T. Products
FILCO® 3 JM
Functions:
Film Former
Chemical Family:
Epoxy & Epoxy Derivatives
FILCO® 3 JM, a modified epoxy resin in a nonionic water emulsion, presents as a milky liquid. It serves as an ideal film for glass fiber sizes used in various applications such as SMC (Sheet Molding Compound) and BMC (Bulk Molding Compound) roving, as well as chopped strands designed for thermoplastic matrices.
P.A.T. Products
Trapylen® 186 EAC
Functions:
Binder & Resin, Adhesion Promoter, Coupling Agent
Compatible Substrates & Surfaces:
Polyethylene (PE), Polypropylene (PP)
Compatible Polymers & Resins:
Natural Rubbers (NR), Styrene Butadiene Rubber (SBR)
Trapylen® 186 EAC is a chlorinated polypropylene dissolved in ethyl acetate. With a higher chlorine content compared to other Trapylen® grades, it exhibits good compatibility with other resins and polymers, excellent pigment wetting, and results in a high-gloss, chemically resistant film. The main advantage of Trapylen® 186 EAC is its outstanding adhesion to untreated polypropylene, PP/EPDM thermoplastic rubber, and, with limitations, polyethylene. However, its resistance against fatty oil and grease is limited.
P.A.T. Products
Deuteron® SO 100
Functions:
Flattener
End Uses:
Radiation Curable Coating
Features:
Improved Mechanical Resistance, Improved Flexibility, Improved Chemical Resistance, Good Surface Feeling, Matting, Good Antiblocking Properties, Recoatability
Deuteron® SO 100 is a liquid formulation containing fine elastomer particles dispersed in DPGDA (dipropylene glycol diacrylate), serving as an acrylic functional carrier. This dispersion of fine elastomer particles is specifically designed for formulating soft-feel coatings. It's available in variations such as water, solvents, and acrylic functional monomers, offering flexibility in formulation and application.
P.A.T. Products
FILCO® JM 366
Functions:
Film Former
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
FILCO® JM 366 is an unsaturated polyester resin formulated in a non-ionic water emulsion. It's characterized by its highly unsaturated nature, which integrates a non-ionic emulsifier within the polymer matrix. This resin offers stability against hydrolysis and sedimentation, features a narrow distribution of particle sizes, and maintains high mechanical shear stability even in diluted emulsion forms.
P.A.T. Products
FILCO® 107
Functions:
Film Former
Chemical Family:
Polyurethanes (PU)
Compatible Polymers & Resins:
Polyamides
FILCO® 107 is a polyurethane resin available in anionic or non-ionic water emulsion form, notable for its favorable hydrolysis resistance and sedimentation stability. It maintains a precise particle size distribution and exhibits high mechanical shear stability even when the emulsion is diluted. Its primary application is as a film in glass fiber sizes intended for chopped strand applications. FILCO® 107 is particularly well-suited for use in thermoplastic matrices, especially in enhancing properties within polyamide-based materials.
P.A.T. Products
ANTISTATIC ADDITIVES
Functions:
Anti-Static Agent
End Uses:
Electronics, Polyester Foams, Polyurethane Foams, Foams, Polyether Foams, Safety Shoes
Features:
Low Viscosity, Electrically Conductive, Anti-Static, Low Fogging
Repi ANTISTATIC ADDITIVES is a medium polarity ionic liquid specifically tailored to improve conductivity properties of microcellular PU and TPU shoe soles, PU composite, PU coatings and C.A.S.E. applications. HP-A REPITAN shows a very good compatibility with polyether and polyester polyols. In footwear applications, including the light density PU soles, HP-A REPITAN is tailored to meet the strict and challenging requirement of ESD safety standard (electrical resistance maximum 35 mega Ohm). Important application for HP-A REPITAN are PU cast elastomers and PU composites for electronics parts where the market requires very low levels of electrical resistance combined with high levels of hardness. Using the HP-A REPITAN, customers are able to minimize the antistatic loading and consequently the hardness decreasing effect.
P.A.T. Products
Agrosurf CMP125
Functions:
Surfactant (Anionic), Surfactant, Compatibilizer
Chemical Family:
Phosphate Esters, Phosphorous-based Compounds, Organophosphates
Labeling Claims:
Foreign matter-free
Agrosurf CMP125 is a complex organic phosphate ester for use as compatibility agents for a wide range of pesticides and liquid fertilizers. This compatibility agent is able to offer stable emulsions and suspensions upon dilution when used at a concentration level of between 1-3%. Agrosurf CMP125 is compatible with anionic, nonionic, and amphoteric surfactants.
P.A.T. Products
Kemsurf OT60
CAS Number:
577-11-7
Functions:
Surfactant (Anionic), Wetting Agent, Dispersant, Wetting Agent, Surfactant, Dewatering Agent, Emulsifier
Certifications & Compliance:
ISO 9001, ISO 45001, ISO 14001
Applicable Processes:
Emulsion Polymerization
Synonyms:
Dioctyl Sodium Sulfosuccinate, Dioctyl Sulfosuccinate
Kemsurf OT60 is an exceptionally effective wetting agent suitable for various applications where ensuring the wetting of a substrate or particle is crucial. Its versatile usage extends to emulsion systems, and it serves as a co-dispersant in combination with other nonionics.
P.A.T. Products
Lansurf STO
Chemical Family:
Ethoxylates, Sorbitan Esters
Functions:
Surfactant (Nonionic), Emulsifier, Surfactant
Labeling Claims:
Biodegradable
Certifications & Compliance:
ISO 14001, ISO 9001
Synonyms:
Span 85
Lansurf STO can be used singularly or in combination with the ester ethoxylates such as Lansurf STO85. Typically this product is extremely hydrophobic and finds use as an emulsifier in many waxes and creams for household applications. Used in combinations with the exthoxylates, Lansurf STO is used in textiles, leather treatments, silicone oils and agrochemicals. This product is also found to be readily biodegradable and would not expect to persist indefinitely in the environment.
P.A.T. Products
Deuteron® LE 80
Chemical Family:
Quaternary Ammonium Compounds
Functions:
Anti-Static Agent, Conductive Agent
End Uses:
Primer, Electrostatic Ink, Top Coat, Electrostatic Coating
Features:
Good Anti-Static Properties
Deuteron® LE 80 is a conductivity additive composed of tetraalkylammonium ethyl sulfate. These anti-static additives facilitate the regulation of surface and volume resistivity in diverse systems. Their impact primarily stems from the surface migration and ionic attributes of the cations, contributing to the adjustment of resistivity levels.
P.A.T. Products
Deuteron® LE 512
Chemical Family:
Quaternary Ammonium Compounds
Functions:
Anti-Static Agent, Wetting Agent
Labeling Claims:
Solvent-free, Plasticizer-free
Features:
Anti-Static, Good Anti-Static Properties
Deuteron® LE 512 stands as a 100% active conductivity additive founded on tetraalkylammonium ethyl sulfate. The utilization of these anti-static additives facilitates the fine-tuning of surface and volume resistivity across diverse systems. The efficacy of Deuteron® LE 512 anti-static properties primarily relies on surface migration and the ionic character of the cations to achieve the desired adjustments in electrical properties.
P.A.T. Products
Organic Coconut MCT (Cerin® CCT)
Ingredient Name:
Coconut MCT Oil
Chemical Name:
Caprylic/Capric Triglyceride
CAS Number:
73398-61-5
Functions:
Supplement, Fat & Oil, Fatty Acid & Lipid, Carrier
Ingredient Origin:
Plant Origin, Natural Origin
Synonyms:
Decanoyl- And Octanoyl Glycerides, ODO
Chemrez Organic Coconut MCT (Cerin® CCT) is a medium-chain triglyceride sourced from organically cultivated coconut oil, entirely free from palm or other oil derivatives. Processed in an organically certified facility, this MCT finds versatile applications in pharmaceuticals, food, and beverages, serving as an ideal carrier for flavors, colors, and vitamins.
P.A.T. Products
ANTIFIAMMA
Functions:
Flame Retardant
Chemical Family:
Melamines
End Uses:
Rigid Foams, Polyurethane Foams, Foams, Flexible Foam
Features:
Easy Handling, Self-Extinguishing, High Performance, Fire Resistance, Low Fogging, Dirt Pickup Resistance
Repi ANTIFIAMMA Flame Retardants range comprises liquid blends of pure melamine dispersions along with different synergistic formulations of primary flame retardants that can be applied to FLEXIBLE and INTEGRAL FOAM as well as to RIGID PU FOAMS. Thanks to their composition and production process, those additives represent a new concept of halogen free flame retardants able to offer perfect distribution into liquid and to enhance instrinsic fire resistance in the end-product by increasing the contact surface of the active principles with the foam. antiFIAMMA represent a step towards safer workplaces, where classified powder handling is a real risk and source of dirt.
Show
15
of 298 results
1
...
13
14
15
...
20