Trapylen® 6800 W

• TRAPYLEN® 6800 W is an adhesion promoter based on chemically modified, low- chlorinated polypropylene dissolved in water. It has outstanding affinity to polyole-finic substrates. It is especially developed to improve surface tension of treated and untreated films, foils, foams and even molded parts of PP, PE, polyolefinic blends, a.o. The inorease of wetting properties permits the bonding, printing, flocking and painting of such substrates.
• TRAPYLENS 6800 W can be occassionally used as adhesion promoter incorporated in adhesives, inks and paints in case of sufficient compatibilitv.

• If Trapylen® 6800 W is used as a straight primer for plastics dilute it down to 10% solids, eventually add e.g. coalescence agents, wetting agents, and rheological additives to the dilution.
• This primer can be applied by spraying, dipping, brushing, or printing.
• When using Trapylen® 6765 W as an adhesion promoter in base coats/pigmented primers, the compatibility of the system must be checked.
• Recommended dosage of Trapylen® 6800 W: about 10% of 100 % formula.
• The resulting base coat can be applied by spraying, dipping, brushing, or printing if the system allows it.

• Protect Trapylen 6800 W from frost.

PE- drums of 120 kg 

• Atleast 6 months from in closed packaging at 15°C.